The VP50 is an automatic hydraulic bollard for use on residential or small commercial applications. With a diameter of 101mm and standing 800mm tall it also has the distinctive ATG yellow reflective bands. The VP50 is usually operated by key fob and is a reliable, functional and stylish way of securing access.
The VP50 Core bollards are visual products meaning that basically the bollards do as they are told. A double press on the fob button sends the bollard up and a single press on the other button sends it down.
The VP50 bollard can also utilise other visual access control options such as key switches or pushbutton.
If the bollard is on the way up and the down button is pressed the bollard WILL reverse back down. The bollard will also stop its upward motion if a vehicle is directly on top of it.
Wall thickness: 5mm
Optional Extras
Stainless Steel Bollard
Stainless Steel Control Box
Drainage Pumps
Pushbutton Operation
Keyswitch Operation
Basic Operating Information
Dual button key fob
7 Seconds up
7 Seconds down
Basic Installation Information
Dimensions of hole: 500mm Square
Depth of hole: 1500mm
Cabinet to Bollard: 10m of cable are provided as standard, this allows roughly 8m between cabinet and bollard. A qualified electrician can significantly increase this distance using the correct
Power: A 240v source must be bought to the cabinet location
Insurance companies recommend 1.3m spacings between bollard centres, ATG Access works to this recommendation unless otherwise stated.