Call +44 (0) 8456 75 75 74
ATG Access

Creating Pedestrian Zones

Ensuring that pedestrians are safe within busy city centres.

Pedestrian safety is of paramount importance to any transport department. In busy city centres with high volumes of traffic.

Separating busy roads from clear pedestrian zones is crucial.
Separating busy roads from clear pedestrian zones is crucial.

To the successful traffic management within an area. Bollards and handrails are used in town centres to line pavements, station approaches and busy shopping streets. These protect pedestrians walking in busy city centres on crowded pavements from wayward vehicles.

Bollards also prevent accidental vehicle incursions on paved areas.
Bollards also prevent accidental vehicle incursions on paved areas.

Controlled exclusion zones can also be created by installing automatic or static barriers cordoning off entire streets/areas from any traffic creating a completely pedestrian friendly zone. The bollards can be dropped if needed for emergency service vehicle access.

Systems used for this purpose have had dramatic effect on city centre traffic management.
Systems used for this purpose have had dramatic effect on city centre traffic management.

Vehicle entry to restricted zones reduced by up to 78%. General traffic delays and vehicle emissions were reduced by up to 18% and pedestrian and cyclist deaths were reduced dramatically.

Services

  • Site Drawing Overlays

    Site Drawing Overlays

  • Turnkey Project Management

    Turnkey Project Management

  • Full In-house Technical Support

    Full In-house Technical Support

  • Dedicated Project Manager

    Dedicated Project Manager

  • Free Site Survey

    Free Site Survey

  • Design Consultation Service

    Design Consultation Service

  • Remote Fault Monitoring

    Remote Fault Monitoring

  • In-House Installation Team

    In-House Installation Team

  • Full Service & After Sales Team

    Full Service & After Sales Team

  • Up to 10 years manufacturers warranty

    Up to 10 years manufacturers warranty

  • Electrical Commissioning

    Electrical Commissioning

  • Maintenance & Operation Training Available

    Maintenance & Operation Training Available

ATG ACCESS IS A WORLD LEADING DESIGNER AND MANUFACTURER OF BOLLARDS, RISING ARM BARRIERS, ROAD BLOCKERS AND VEHICLE BARRIER SYSTEMS.

SUPPLYING PRODUCTS TO OVER 40 COUNTRIES, ATG ACCESS ARE MARKET LEADERS AND HAVE OVER 25 YEARS EXPERIENCE IN THE PHYSICAL SECURITY INDUSTRY.

Cardiff City Council

When the major shopping complex in the city centre - St David's was renovated, Cardiff CC installed ATG Access, VP traffic management systems outside the idyllic City Hall campus and enforced bus only lanes within the city at 3 different... Read more

Traffic Management – The Basics

This article will begin to explore the different ways in which you can control traffic and secure areas of a busy city using simple yet effective measures to help segregate authorised vehicles from general traffic; thus affording greater... Read more

Products

Rising Bollards for the Highway

Effective traffic management systems, reducing traffic congestion and protecting pedestrians within busy city centres.  Read more

Counter Terrorism

Impact tested bollards, barriers and road blockers.  Read more

Fixed Bollards & Hoop Barriers

Our fixed bollards and hoop barriers are supplied in a multitude of different shapes, sizes and finishes. Fixed bollards are primarily used to stop vehicles from entering an area or to protect pedestrian walkways from way-ward vehicles. Shopfronts, ATM machines and roller shutter doors can also benefit from fixed bollards to prevent ram-raid attacks. Hoop barriers are an alternative to fixed bollards and may be more cost effective when you have an extensive length of perimeter to protect.  Read more

Stainless Steel Bollards

Fully retractable, lift-out or fixed, stainless steel security bollards are a stylish way of restricting vehicle access to your site. Stainless steel fixed bollards are supplied with an overall length of 1,300 mm so can be installed to your site specific height requirements. Our stainless steel lift-out bollard has a thinner wall thickness than the fully retractable models allowing the bollard to be lighter and easily lifted by operators. ATG Access have a full installation team or alternatively, full fitting instructions are supplied with each product.  Read more