The ATG Access Patriot Beam Barrier is one of the strongest barriers in the market and is fully tested to the ASTM F3016 standard.
The Patriot Beam Barrier is the ideal solution for establishing a tiger-trap system, enabling security checks, or as a continuation of a protected perimeter fence or gates.
The Barrier was tested with a width of 7,200mm but is available in widths from 3500mm to 7200mm. It comes in either a hydraulic or manually operated model. With the hydraulic version, the barrier's drive motor is rated at 100% continuous duty cycle and operating speeds vary from 3-5 seconds for raise and lower.
This can be reduced to just 1 second by adding an emergency fast operation (EFO) function the barrier. A model with manual operation is available for remote sites with no access to an electric supply, or for sites which only require occasional access.
The barrier comes hot-dip galvanised and then painted with a polyester coating for maximum corrosion protection. We can coat the bollard with any RAL colour specified to meet the aesthetics of the site. The trench depth needed to accommodate the beam is just 305mm, while the stanchions on either side of the beam require a depth of 1220mm.
The Patriot Barrier is quick and easy to install and has been designed with serviceability in mind, with all fixings above ground, ensuring the longevity of the product long after installation. Its durable design allows it to operate reliably in extremely hot and cold climates.
Please provide the information below to access your download.