SPTT Manually Retractable Bollard

PAS
68

The SPTT Manually Retractable Bollard has a unique double retractable design which ensures smooth operation and acts as a depth saving feature. 

Technical Specification

Security Rating
PAS 68: V/7500(N2)/64/90:0.5/6.1
Minimum Array
1
Power
Integral HPU
Diameter
209mm (top) / 280mm (bottom)
Height Above Ground
1000mm
Foundation Depth
900mm
Finishes
Sheradised black finish as standard. Option to sleeve with a stainless steel finish depending on application (210mm top, 282mm top diameter). Product can be vinyl wrapped with a bespoke design or advertising copy. A RAL finish is also possible on request.

Enquire about this product

Please tick the box if you would like to opt-in to marketing emails from ATG Access.

See our privacy policy.

Thanks to its unique double retractable design, the SPTT Manually Retractable Bollard requires a fraction of the depth to install compared to a traditional retractable bollard. 

Most impact tested retractable bollards have a foundation depth of around 1,500mm, the SPTT, on the other hand, can be installed with a depth of just 900mm - less than a meter. As well as acting as a depth saving feature, the double retractable design ensures smooth operation. 

The SPTT Bollard has been impact tested in accordance with BSI PAS 68, successfully withstanding a 7,500kg vehicle travelling at 64kph (40mph) all while achieving less than a meter penetration. While it is based on the Automatic SPTT, the manually operable model is controlled through the simple use of a hand-held battery drill or a manual hand crank. 

This means that the SPTT requires no electricity or hydraulics to raise and lower the bollard, making it ideal for remote sites with limited access to an electricity supply. It's straightforward to use requiring only 12 seconds to raise the bollard and 6 seconds to lower it. 

As an added benefit, we estimate that the total saving for a manual system to be up to 50% of a completely automated one.     

The bollard comes in a sheradised black finish as standard. There is an option to sleeve the bollard with a stainless steel finish depending on application (210mm top, 282mm top diameter). The SPTT can also be vinyl wrapped with a bespoke design or advertising copy. A RAL finish is also possible on request. 

Download the specifications

SPTT Manually Retractable Bollard Datasheet

Related Products

Highways England
Bsi Iso 9001 2015
Safe Contractor Approved
Sold Secure
Bsi Iso 9001 2015
Bsi Iso 14001
Export Champion 2017
Risqs Verified
Pssa Logo
Free site surveys
Installation team
After sales team
1 year Warranty

Get in touch to find out more

Please tick the box if you would like to opt-in to marketing emails from ATG Access.

See our privacy policy.
Want to know more? Call the Sales Team
+44 (0)345 350 3799
© ATG Access Ltd. CoBaCo House, North Florida Road, Haydock Industrial Estate, WA11 9TP
VAT Number: 156 943 773 / Registration Number: 2643622 Website by Bespoke
Contact our Team

Please tick the box if you would like to opt-in to marketing emails from ATG Access.

See our privacy policy.
Request a Quote

Please tick the box if you would like to opt-in to marketing emails from ATG Access.

See our privacy policy.
Book your place
See our privacy policy.
Ask us a Question
We'll only use your details to contact you about your question See our privacy policy.
We just need a few details

Please provide the information below to access your download.

We just need a few details

Please provide the information below to access your download.