Stopper 10 Anti-Ram Bollard

Bridging the gap between our anti-ram bollards and our high-security impact tested bollards, the Bristorm Stopper 10, has been impact tested with a 2,500kg impact trolley at 16kph (10mph).

Impact tested to the new BSI PAS 170 specification the Stopper 10 Bollard is the ideal choice for protecting areas at risk of low-velocity attacks or accidental impacts. The bollards themselves are comprised of a standard 139/168 CHS HR section cast in concrete. 

The Stopper 10 Bollard can be installed as standalone products or built into a pedestrian guardrail to be combined as a security and safety feature, keeping pedestrians safe and exclude vehicles from an area or walkway. 

The ‘Class 4D Guardrails’ are bolted to the bollards with shear nuts. The Bollards have additional lugs (50x10-55lg) mild steel when a guardrail is required. The height of the guardrails shall be 1,005 mm from the finished ground level.

In order to comply with the product's certification, the bollards need to be spaced at a maximum length of 1360mm  or 1330mm centre to centre. 

With a foundation depth of just 725mm, the Stopper 10 Bollard can be easily installed without vasts amounts of excavation, saving on time and minimising disruption.

The Stopper range comes in steel hot-dip galvanised to BS EN ISO 1461, to protect against corrosion. Additional coatings or powder coatings can be applied to achieve a specific coating thickness or to match site aesthetics. 

Looking to protect your shop or warehouse with anti-ram raid bollards? Our Stopper bollards are an ideal solution. Read our complete guide to find out why you need anti-ram raid bollards.

Want to know more about the PAS 170 standard? Read our definitive guide to find out everything you need to know.