Brought to you by ATG Access the Bristorm Stopper 20 has been impact tested to BSI PAS 170, capable of stopping a 2,500kg vehicle at 32kph (20mph). This bollard is ideal for anti-ram raid applications such as the protection of shop frontages or EV charging points.
The Stopper range of bollards has been tested to the new BSI PAS 170 specification, which is used to measure the capability of bollards at speed of 10 and 20mph. This makes these bollards ideal for protecting sites at risk of low-velocity attacks or accidental hits such as retail outlets or car parks.
For more robust protection we recommend taking a look at our line of PAS 68 rated bollards which have been tested at speeds of 30mph, 40mph, and 50mph. Each Stopper 20 Bollard is made up of a standard 168 CHS HR section cast in concrete. Similar to the Stopper 10, the Stopper 20 can be installed either as a standalone bollard or built into a guardrail. This allows you to keep pedestrians safe and exclude vehicles from an area or walkway.
When installing the bollard, to comply with the certification the bollards need to be installed with a clear gap of 1,200 mm, measured 600 mm above floor level. This ensures that the bollards are installed as tested.
When it comes to security longevity is key, as such all our Stopper bollards are hot-dip galvanised to BS EN ISO 1461 after fabrication, giving added protection against corrosion.
Additional coatings can be applied to achieve project-specific coating thickness or client aesthetic requirements.
Looking to protect your shop or warehouse with anti-ram raid bollards? Our Stopper bollards are an ideal solution. Read our complete guide to find out why you need anti-ram raid bollards.
If you want to learn more about PAS 170, then read our definitive guide on the impact test standard.
Please provide the information below to access your download.
Please provide the information below to access your download.