The VP50 500 Automatic Bollard Stainless Steel offers sleek stainless steel design and seamless operation making for the ultimate driveway bollard.
Operated remotely by a dual button key fob. Once the VP50 500 Automatic Bollard is in raised in the ‘up’ position, the property is secure and unauthorised vehicle access is impossible. Driveway access control has never been easier.
With the VP50 500 Single Bollard System package, you get -Â
With the Dual Bollard System package, you get -Â
With the Triple Bollard System package, you get -Â
Standing 500 mm tall and finished in brushed stainless steel this automatic rising bollard is a compact yet attractive solution to protect your property. It comes with two reflective bands as standard to improve visibility, ensuring that the bollard is clearly visible to pedestrians and cars alike.Â
It takes just 7 seconds to raise or lower the bollard making controlling access quick and easy. The hydraulic system used fo the VP50 500, has been designed for 200 cycles a day, giving it consistent performance day in day out. Compared with some of the electric rising bollards you might find, our hydraulic systems are reliable and easy to use.
It is the home owner’s responsibility to ensure that there is a suitable power supply (socket or fuse spur) within 8 meters of the proposed bollard location before ATG Access or a contractor begins the bollard installation. Power supply can take the following forms:
o  If you have electrical lights already in situ within your driveway, you could ask an electrician to use the existing power supply to create a fuse spur or socket.
o  If you have an existing power socket within your garage which is located within 8 meters if the bollard position, this can be utilised to run the bollard system.
o  If no power supply exists within 8 meters of the wall-mounted cabinet; you will need to ask an electrician to create a fuse spur or socket to run the bollard system.
A 13-amp, single-phase supply is required to connect to the wall-mounted cabinet. The wall-mounted cabinet must be located within 8 meters of the bollard system. If the bollards are to be positioned more than 8 meters away from a wall-mounted cabinet, the motor cables will need extending at an additional cost.
A 13-amp, single-phase supply runs a maximum of 4 bollards. If you require more than 4 bollards, speak to us about the power supply requirements
Delivery to site is included; 1-3 bollards require one pallet; 4-8 bollards require two pallets.Â
The delivery vehicle will have a tail lift, plus a hand truck. It is the driver’s responsibility to unload and position the pallets at your specified delivery site.
Your bollard system will be controlled by a handheld, radio key fobs. Two are supplied with every system. The key fob contains two buttons; button 1 = lowers the bollard system; button 2 = raises the bollard system.
If you require an alternative method of access control such as operation using an intercom system or a rolling keypad – speak to one of our sales advisors.
Please provide the information below to access your download.
Please provide the information below to access your download.